Amazon.com
🏆Motorola Halo+ Video Baby Monitor
Infant Wi-Fi Camera with Overhead Crib Mount – 4.3-Inch Color Screen with Infrared Night Vision and Intercom – Compatible with Remote Viewing App and Sleep Tracker
Best video review high-tech Motorola Halo+ video baby monitor
Hey guys, Andrew here with Dad Verb. If you want more videos and reviews for new parenting hit that subscribe button. It’s absolutely free. So, let’s start with a look at the basic specs and get a general overview of this monitor.
The camera itself is a full HD, 1080p camera, and uses 8 infrared LEDs for up to 30 feet of night vision. It’s built with both a microphone and speaker, for two-way talk and lullabies, And offers motion and sound detection. Now, one thing to know, is that it does not have pan or tilt capabilities.
It was designed to be fixed on a flat surface, in what they call “desktop mode” Or give you a birds-eye view via their mount in dark mode. And on that note, the Motorola Halo gets its name from the halo mount for the camera.
That’s what gives it that “space shippy” look, which is the word that my wife used to describe it. Aesthetically it’s a bit much for me, I knew that it would be bigger, but seeing it in person, hovering over that crib. It’s a lot of plastic hanging up there, especially when comparing it to our Nanit. Which is just a little bit cleaner? Granted this does do a couple more things though, namely, it can project images onto the ceiling, with the general idea being that it would entertain a baby as a crib mobile would.
The halo ring around the camera, serves as an upward-facing night light, with three levels of intensity, and a wide array of color options, that can either be controlled on the parent unit, or in the app, which I will talk about in just a sec. The mount itself is very easy to install and comes with a telescopic leg to adapt to most cribs.
The thing I personally found a little bothersome, is how the mount can potentially get in your way, depending on your crib. Ideally, you would install the crib mount on the rear, to get a full top-down view of the crib. For our Babyletto crib that works fine.
But with cribs with a back, you’re forced to install it elsewhere, and because the sides yield a sub-optimal viewing angle, you’re most likely gonna have to install it in the front. Aka, loading zone. While it’s a minor thing, it does kinda get in the way, of a parent while taking the baby in and out. Moving on. Let’s take a look at the monitor.
One of the most appealing things about the Halo +, is that you can use it either, as a connected or a non-connected option. Non-connected meaning it’s not hooked up to the internet.
This is really cool, as not all monitors have that dual functionality. And it can come in handy in a few ways. For example, if you’re on a date night, and you have a sitter or your family watching the baby, You can give the sitter this monitor right here, and from afar while you’re out, you can tune into the feed through your app.
So that’s pretty handy. Another example could be, you might be the type that really enjoys the app, but on occasion, you like a continuous video feed, which you can’t really do through your phone, cause it kills your phone battery. So during nap time, as you’re folding laundry or something like that. You can just have this sitting there, and have the continuous video feed, as needed while keeping your app as a primary source, in which you tune in to the feed. The screen on this parent unit is 4.3 inches, and standard definition which, is a little disappointing. While the camera is full HD as I mentioned.
The monitor is lo-res and fairly pixelated, I wish the picture could be cleaned up, just a little bit. Luckily it’s not as bad as the Infant Optics DXR-8. But it isn’t as good as the Eufy Spaceview, which, that is an HD monitor. The battery life will last you, up to five hours continuously but, it is longer if you just use it for audio.
Also you’ll find a pop-out stand on the rear, that resembles the Nintendo Switch, to keep it upright as needed. On the front are eight buttons that give you access to all the features, that include, “Push to Talk”, “Light”, “Color”, “Brightness”, “Zoom”, and the ability to add multiple cameras. And on the top are the buttons to toggle power and volume. Now in my experience, I usually keep the volume at just level one, the microphone seems to be super sensitive, or something, because I can hear, everything in that room. So, even a little whimper or cry, will definitely get me awake.
Unless you’re a really heavy sleeper, I don’t really envision you need to push the volume very high. The last thing I’ll say about the monitor is this button right here. Usually, when you press it, you’re supposed to see sleep insights, but when I press it, the unit just kinda goes to sleep.
So that’s a little bit disappointing. I don’t know if that’s isolated to mine. But it doesn’t matter, ’cause there’s an app, where you can see all of that stuff anyway. Through the Hubble app, you can really get a crisp HD view, of the crib. Quality of the feed really is good, I’ll give it that.
Through here you can enable sound and motion alerts, as well as download lullabies from the Hubble cloud, to add to the library. But there are a couple of improvement points, I’d say about the app though.
First it’s flanked by ads and buttons, to drive traffic to Amazon or additional products. And there’re banners prompting you to upgrade, to it’s a premium plan for additional features, like Smart Zones and longer video history. I wish that wasn’t there. We already paid like 300 bucks for this thing. You know, can we just be left alone. I don’t know. I wish instead of having to navigate the home screen, It just took you directly to the feed. That’d be so much better.
Second, I actually do like the feed and the button placement, I like the quality of it, it’s super crisp, but connectivity issues are the largest complaint, I’ve seen with this app, and I had to agree on a little bit. Stability was iffy in the feed, it had dropped on me, on a handful of occasions and start-up can take a minute.
So if I had to sum-up my overarching experience, with the Halo +. I’d say it’s been good, with a few places for improvement. If you don’t want gadgets everywhere, and you just want a consolidated, jack-of-all-trades solution, this is for you. Never half-ass two things. Whole-ass one thing. To run Swanson’s point, this does a lot of things. But does it do certain things better than other monitors? No. Then again, those other monitors aren’t as versatile.
This is, a camera, it’s a night light, it’s a sound machine, it’s kinda a crib mobile. It can be used during the toddler stage, after the infant stage. But, you know, where this thing really shines, is it’s the ability to be used as a dual connected and non-connected monitor.
Here’s what I’ll say though, If I knew 100% that I wanted a connected Wi-Fi monitor, I’d probably still stick with my Nanit. It’s in the same price range as the Halo +, at around 300 bucks. Except it’s got better stability, better user interface, and it also tracks breathing. Now, on the flip side, if I knew that I wanted a non-connected monitor, I’d probably stick with the Eufy Spaceview, since, it is cheaper, about half the price, and you are getting better quality out of it.
Now depending on your use case, you might wane in the middle, you might want that dual functionality, for the scenarios I talk.
Baby Monitor, VAVA 720P 5
🥈VAVA
Baby Monitor, VAVA 720P 5″ HD Display Video Baby Monitor with Camera and Audio, IPS Screen, 900ft Range, 4500 mAh Battery, Two-Way Audio, One-Click Zoom, Night Vision and Thermal Monitor
Best video review high-tech Baby Monitor, VAVA 720P 5
Panasonic Video Baby Monitor
Monitor with Remote Pan/Tilt/Zoom, Extra Long Audio/Video Range, 2 Way Talk & Lullaby or Noises – 1 Camera KX-HN4101W
Best video review high-tech Panasonic Video Baby Monitor
Learn more about Panasonic Video Baby Monitor on the official website
Hi, this is Christine Prasad for Best Buy Canada and I’m going to show you the Panasonic Long-Range Baby Video Monitor.
I’m in my guest room right now where I have the camera set up and then I’m gonna take you downstairs to the monitor to go over some of those features. So, here we go. So here’s the camera which is pointed at a guest bedroom I’ve got here. I’ve got Hulk set up there to kind of look like a little baby in the room.
And now we’ll go downstairs to where the monitor is positioned. Okay, so the monitor has some pretty neat features. It’s really easy to operate. So go into the menu, you can zoom the camera, there are built-in lullabies, timer, sensor, it’s got temperature sensor, as well as a motion sensor. So, if motion is detected, it’ll kinda make a little chime.
You can adjust the volume for that and just make the screen light up if you don’t want the sound to come through. So you can see I can go back and forth here panning and tilting to get a better view. Now if I wanted to zoom in here. Zoom up a lot closer, say okay.
Now I’m much closer here to the baby or hulk. You can also speak by pressing and holding the mic and then you can say something to the child. You can see the temperature reading is up here.
It shows you how many cameras, you can connect up to three different cameras if you wanted to have one indifferent kid’s rooms or in a playroom or whatnot. And I’ll show you some of the long-range features as well. So I’m here in front of my house.
The camera is upstairs in a guest bedroom on the upper level and I’m gonna see how far I can go. So you can see the monitor is looking at a stuffed animal on the bed. I’ve got three bars and let’s see how far we can walk.
Okay, so I’m at one house down. Two houses. Looks like I’ve got two bars now. Okay, now it’s not, I’m at three houses now, it’s not showing any bars but I still got a signal it appears. Four. Five houses. Six houses. Okay, I’m at six houses down, it seems like I’ve lost, I’ve lost the signal now. So I’ll turn back. And I’m back, so about five or six houses down.
You can see my house there in the distance with the blue car. That’s how far I can walk. Okay, now I’m gonna test the signal of the monitor to the camera within my house. So the camera is upstairs on the upper level of my home. I’m on the main level, right now I’ve got three bars of signal, and now I’m gonna walk around, go down to my basement and see how the signal keeps up.
So there are a lot of concrete walls and obstructions in my house that could impact the signal. So I’m here in the basement right now. Looks like I still got a full three bars. Just have to wake up the screen there. Still three bars. So I’m here in my office area.
So if I was working downstairs, I would still be able to keep an eye on a child or a baby. In my son’s playroom. Again, there’s a big concrete wall here, seems like it hasn’t impacted the signal at all. We’ll go around to our cedar room which seems to be tough to get a signal in here typically because of the walls and concrete and such.
Okay, looks like I’m still a full three bars. So, my house is about 1500 square feet plus the basement area where I am now and doesn’t seem like there’s anywhere that I’ve gone that has an issue with the signal. So, a typical home, you can get a full three bars pretty much anywhere. So that’s the Panasonic Long-Range Baby Video Monitor and thanks for watching.
Nanit Plus
Smart Baby Monitor and Wall Mount: Camera with HD Video & Audio – Sleep Tracking – Night Vision – Temperature & Humidity Sensors and Two-Way Audio
Best video review high-tech Nanit Plus
high-tech Miku Baby Monitor
Miku Smart Baby Monitor
Breathing & Movement Monitor – HSA/FSA Approved – Real-Time Breathing & Sleep Tracking – HD Video & Audio, Night Vision, Two-Way Talk, Sound, Humidity & Temperature
Read more about Miku Smart Baby Monitor on the official website.
Best video review high-tech Miku Baby Monitor
Owlet Smart Baby Monitor Duo
Smart Sock + Camera
Best video review high-tech Owlet Smart Baby Monitor Duo
The Review
Motorola Halo+ is the winner of the best baby monitor with video
Infant Wi-Fi Camera with Overhead Crib Mount - 4.3-Inch Color Screen with Infrared Night Vision and Intercom - Compatible with Remote Viewing App and Sleep Tracker
PROS
- MONITOR FROM ANYWHERE
- CRISP & CLEAR DISPLAY
- STAY ON TOP OF BABY'S HEALTH
- MAKE BABY FEEL SECURE
- SOOTHE BABY TO SLEEP
CONS
- Zoom
Review Breakdown
-
Quality of material
-
Picture quality
-
Night vision
-
Battery life
Security and privacy: 1. is this an fhss device? 2. are the data-in-transit and the data-at-rest encrypted? 3. what is the encryption protocol?
ANMEATE Infant Video Display features 2.4 GHz FHSS (Frequency-Hopping Spread Spectrum) safe and secure cordless transmission modern technology. The display gives safe and safe Point to Direct electronic security wireless transmission. The device operates in 2400-2480 MHz auto tuned regularity, decreasing the threat of disturbance with any other digital tool working in its vicinity.
For ideal results, it is suggested that there should be a distance of at the very least 3 feet in between electronic camera system, parent unit as well as any other electronic tool in your residence for smooth reception of sound as well as video clip signals.
For any type of additional concerns, please contact us as well as we will more than happy to aid.
Like!! I blog frequently and I really thank you for your content. The article has truly peaked my interest.
I do not want a monitor AVENT to transfer video clip and/or audio constantly (regularly). I want it (cam not keep track of) to quit transferring. Is this eco-mode?
Hey there! Yes, the Eco Setting for this Avent video infant monitor permits the moms and dad screen to switch off while there is no movement.
Does the cam need to be connected in to function Panasonic Video Baby Monitor or do they have batteries?
Panasonic features a certain battery that requires to be connected in to charge but last a long time when unplugged.
Can you hear if the baby is weeping with the hand held moms and dad monitor Motorola Halo+?
Hi Bonnie,
Yes, you ought to have the ability to hear the audio from the camera on the parent device.
If you have any type of additional inquiries.